Description
DEMO MODEL – Kenwood KAC-M1824BT Compact Bluetooth 4 Channel Digital Amplifier
Summary
- Signal to Noise Ratio: 90 dB
- RMS POWER Output 4Ω: 45W x 4
- RMS POWER Output 2Ω: 45W x 4
- RMS POWER Output Bridged: 90W x 2
- Dimensions(WxHxD): 5-11/16″ x 1-3/4″ x 3-7/8″
- Singal Sensing Turn-on
- Conformal Coating *1
*1: Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
Overview
Built-In Bluetooth
With today’s smartphones hosting a wide variety of listening choices such as stored music, internet radio, podcasts, etc., it is no wonder that customers want to use this as their primary listening source. Bluetooth offers the easiest and most popular connection, KAC-M1824BT is not only your standalone Bluetooth gateway but if used with an in-dash receiver, it will double the power of a typical CD receiver with it’s built-in 45Watts x 4 of amplification. A water resistant controller can be used to adjust volume and change tracks.
Multi-Appliciation
Many of today’s powersports have very limited space to work in and tend to be a harsh environment for electronics because of the exposure to outdoor environments. Kenwood’s compact performance amplifiers are small in size so they fit even the most limited installation areas. The amplifiers also use a conformal coated main PCB (printed circuit boards) which offer extra layers of protection to help prevent moisture or damp air from damaging the product.
Specifications
| Title | Compact Bluetooth 4 Channel Digital Amplifier | |
|---|---|---|
| Amplifier Type | Class D | |
| CEA-2006 Primary Ratings | Power Output | 45Watts RMS x 4 at 4 Ohms and ≤1%THD+N |
| Signal-to-Noise Ratio | 74dBA (Reference: 1Watt into 4Ohms) | |
| Maximum Power Output | MAX POWER | 400W |
| Specifications | Signal to Noise Ratio | 90dB (Reference: Rated Power into 4Ohms at 14.4V) |
| Frequency Response | 20Hz-20kHz (+0dB, -1dB) | |
| Input Impedance | 10k ohm | |
| Speaker Impedance | 4Ω | |
| Terminals | Battery & Ground | MOLEX Connector with 1500mm Wire |
| Speaker Output | MOLEX Connector with 1500mm Wire | |
| Line In | RCA (Ni) | |
| Line Out | RCA (Ni) | |
| General | Dimensions(WxHxD) | ‘5-11/16 X ‘1-3/4 X ‘3-7/8 inch |
| Weight (kg) | – | |
| Operating Voltage | 14.4V（11-16V allowable） | |
| Key Features |
CEA-2006 Compliant |
|
| Others |
apt-X |
|
